LakeLevelIs Milford Reservoir low right now?
Milford Reservoir was at 1,146.87 ft on October 10, 2026, 2.47 ft above its full pool of 1,144.4 ft. That is 1.03 ft above the typical level for October 10, within the normal range. Over the past week the lake has been steady.
Milford Reservoir on Oct 10 in past years
Daily levels, last two weeks
| Date | Level (ft) | Change | vs full pool |
|---|---|---|---|
| Oct 10 | 1,146.93 | −0.17 | +2.5 |
| Oct 9 | 1,147.10 | −0.23 | +2.7 |
| Oct 8 | 1,147.33 | −0.19 | +2.9 |
| Oct 7 | 1,147.52 | −0.12 | +3.1 |
| Oct 6 | 1,147.64 | +0.01 | +3.2 |
| Oct 5 | 1,147.63 | +0.32 | +3.2 |
| Oct 4 | 1,147.31 | +0.43 | +2.9 |
| Oct 3 | 1,146.88 | +0.26 | +2.5 |
| Oct 2 | 1,146.62 | +0.33 | +2.2 |
| Oct 1 | 1,146.29 | +0.25 | +1.9 |
| Sep 30 | 1,146.04 | +0.09 | +1.6 |
| Sep 29 | 1,145.95 | −0.06 | +1.5 |
| Sep 28 | 1,146.01 | −0.03 | +1.6 |
| Sep 27 | 1,146.04 | ±0.00 | +1.6 |
About Milford Reservoir
- Full pool
- 1,144.4 ft (Top of Conservation)
- 10-year range
- 1,140.7 ft (December 20, 2023) to 1,174.7 ft (June 26, 2019)
- Operated by
- U.S. Army Corps of Engineers
- Data
- U.S. Army Corps of Engineers — NWDM district, MILD
- Datum
- LOCAL
Lakes near Milford Reservoir
- TUTTLE C LakeKansas · 20 mi 2,094.0 ft +4.3 wkNormal for this time of year
- Tuttle Creek ReservoirKansas · 20 mi 1,094.0 ft +5.0 wk19.0 ft above full pool
- Council Grove LakeKansas · 35 mi 1,276.2 ft −4.0 wk2.2 ft above full pool
- Marion LakeKansas · 50 mi 1,350.7 ft −1.6 wkAt full pool
- Kanopolis ReservoirKansas · 66 mi 1,467.1 ft +1.1 wk4.1 ft above full pool
- Melvern ReservoirKansas · 75 mi 1,038.8 ft −1.1 wk2.8 ft above full pool
Questions
Is Milford Reservoir low right now?
Milford Reservoir was at 1,146.87 ft on October 10, 2026, 2.47 ft above its full pool of 1,144.4 ft. That is 1.03 ft above the typical level for October 10, within the normal range. Over the past week the lake has been steady.
What is full pool for Milford Reservoir?
Full pool (Top of Conservation) is 1,144.4 ft above sea level, per U.S. Army Corps of Engineers. Levels above it mean the operator is storing flood water; levels below it are normal in late summer and winter drawdowns.
How often is the Milford Reservoir level updated?
The operator reports every 15 minutes to an hour. This page refreshes several times a day; the time of the latest reading is shown next to the level.
Where does this data come from?
U.S. Army Corps of Engineers (NWDM district, MILD). Readings are provisional and can be revised.